 |
|
 |
Categories |
 |
|
|
Apexi GT 3" Stainless Downpipe : EVO 8
The Apexi GT spec Evolution Down Pipe is all mandrel bent using all polished 304 stainless steel (including flanges.) It bolts directly to the manifold using all factory hardware and continues on to the factory catalytic. Fits Mitsubishi Lancer...
$268.95
|
|
APS 3" High Flow Cat : Lancer EVO 8
APS HFC features a true 3 inch inlet/outlet connections, it features a highflowing stainless steel monolith packed in stainless steel mesh. No otheraftermarket converter (and few O.E.M. pieces) are constructed to such a highspecification level....
$295.00
|
|
Authority 3" Stainless Downpipe
The Authority 3" EVO Downpipe is constructed of 304 polished stainless steel mandrel bent piping. The Authority downpipe will bolt up to the stock o2 housing or any of the aftermarket o2 housings. The Authority downpipe bolts to the stock...
$144.95
|
|
Authority High Flow o2 Housing Turbo Outlet: Lancer EVO 8
Looking for a few extra HP and quicker turbo spool from your EVO? Look no further then the Authority stainless EVO high flow o2 housing. The Authority high flow o2 housing replaces the restrictive stock pipe in between the turbo and the downpipe....
$158.95
|
|
Cobb Tuning Evolution VIII / IX Downpipe
A turbo downpipe is one of the premier modifications most EVO owners look to upgrade on their vehicle. We engineered our downpipe to fit the specific needs of the EVO chassis. The COBB EVO downpipe fits within the factory chassis bracing without...
$261.25
|
|
DC Stainless Downpipe W/Cat Delete - Lancer EVO
This DC downpipe is a full downpipe and also replaces the cat bolting directly to the cat-back system. DC Sports downpipes are made of 3" 100% T-304-stainless steel only, and are for use on Off-Road vehicles only (not C.A.R.B. exempt)....
$258.95
|
|
DNP Stainless Race 02 Housing Turbo Outlet - Lancer EVO
Fully tig welded stainless steel race 02 housing for the Mitsubishi Lancer Evolution VIII. After installation you will gain 6-14 HP, instant throttle response, and quicker turbo spool.If you are after all the power you can get for your EVO. We...
$299.99
|
|
Espelir Stainless EVO Downpipe
This downpipe is full stainless steel with thick flanges and tig welded hangers which give the downpipe a perfect fit. The turbo to downpipe flange uses the factory donut gasket. The diameter of the downpipe is 3 inch for best flow.Espelir is...
$185.00
|
|
HAFE EVO Cast S.S Turbo o2 Housing
Team this piece up with the Hafe Exhaust manifold to start making a true bolt on turbo kit. To make a kit you will need this, Tail 44mm waste gate, Turbo, Oil and coolant lines, gaskets, and the Hafe Manifold. This is prefect for a...
$395.00
|
|
HKS 2.75" Stainless Downpipe
The addition of a downpipe yields significant horsepower gains. The HKS downpipe is the most economical downpipe solution for your car. The piping is 2.75" Stainless Steel, and includes gaskets & bolts. Fits: Mitsubishi Lancer...
$369.95
|
|
|
 |
|
 |
|
|
