|
The AGP Turbo FMIC features tig welded constructed end tanks attached to a
20x12x3.5" bar and plate core.
This assembly fits perfectly in the factory location and does NOT require you
to remove or trim any portion of the stock bumper support. It also clears the
factory lower under-tray so you do not need to remove it.
It cools at 90-99% efficiency under almost all conditions and has less than
.75psi pressure drop at 450 hp of airflow. You couldn't heat soak this if you
tried.
Throughout our dyno testing on the Evo X, we kept seeing timing retard (knock)
around 5000rpm with the factory intercooler and 91 octane gas, where the power
would drop. Since we upgraded to this intercooler, we've noticed consistant
power across the board due to a cooler air charge. Back to back pulls on the
dyno now result in identical power curves due to no heatsoak.
The FMIC includes:
- 20x12x3.5 bar and plate core
- Silicone hoses and clamps
- All necessary installation hardware
Available with a red or black AGP Logo.
Fits: Mitsubishi Lancer Evolution X
$679.95
|
