|
ACT Street Discs
- Quiet operation from OE quality torsional dampeners
- Increased clutch life
- Reduced fade - increased heat tolerance which helps prevent warping of mating
surfaces
Performance Disc
- High Copper Content Friction Lining for Heat Tolerance
- Higher Burst Strength Due to Steel Backed Linings
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- SFI Certified to Insure Safety (most discs)
Stock Disc
- Quality Replacement Disc - SFI Certified to Insure Safety (most discs)
Modified Disc
- Quicker Shifting and Engagement
- Increased Strength and Reliability
- Better Friction Material for Heat Tolerances
- SFI Certified to Insure Safety (most discs)
| |
ACT Stock |
ACT Modified |
ACT Performance |
| Torque Capacity (10=Highest
torque capacity) |
4 |
5 |
6 |
| Heat Capacity (10=Highest heat
capacity) |
8 |
9 |
10 |
| Quick Gear Shift (10=Quickest
gear shift) |
5 |
6 |
7 |
| Smooth Gear Engagement
(10=Smoothest engagement) |
10 |
9 |
8 |
| Durability (10=Most durable) |
7 |
8 |
9 |
| Disc Weight (10=Lightest weight) |
3 |
3 |
3 |
|
|
|
|
Additional Information:
1) ACT carefully selects the right amount of cushioning between the linings
to allow for good engagement characteristics without sacrificing performance.
2) Most ACT spring centered assemblies use bushings and cone springs similar to
factory clutch discs. This creates frictional dampening which improves clutch
life and reduces noise.
3) Spring retainers by ACT utilize a wrap around spring window that not only
gives liberal support for the springs, but also reduces stress concentrations
that are a common cause for failure. (Offered on most ACT Modified and
Performance Street Discs).
4) ACT performance linings are steel backed for maximum burst and rotational
strength.
5) They carefully broach splines to ensure exact fit onto transmission input
shaft for long spline life and better clutch release.
6) Heavy duty torsional dampening springs are stronger in most cases than
standard springs and are provided in the best sizes and spring rates to suit the
application.
7) ACT Performance Street Discs feature a high copper content friction material.
Through the use of copper the heat is pulled away from the surface. ACT achieves
better heat tolerance and faster recovery from overheating.
8) Top grade rivets are used to securely fasten the part together. Rivet design
and rivet materials are carefully selected for maximum strength.
9) Spring windows on most ACT street discs are heat treated to resist wear,
increase strength and reduce the chance of springs "popping" out.
10) ACT provides thicker retainer stampings for increased strength and
reliability. (Offered on most ACT Modified and Performance Street Discs).
11) All modified, performance and many standard replacement discs are certified
as meeting SFI Specification 1.1 and are legal in all racing organizations that
require SFI Certification.
12) Precision stampings for disc components are manufactured using dedicated
tooling. This allows ACT to offer the highest in quality and consistency.
Application(s):
Ford Escort GT 1.8L 1991-1996
Ford Probe 4Cyl Non Turbo 1988-1992
Ford Probe 4Cyl 1992-1997
Ford Probe V6 1993-1997
Mazda 626 1993-2002
Mazda 626 Non Turbo 2.5L 1993-2002
Mazda 626 Non Turbo 2.2L 1998-2002
Mazda Miata 1989-05
Mazda Protégé 4WD DOHC 1990-1995
Mazda Protégé 2.0L 2001-2003
Mazda Protégé Turbo 2003
Mazda RX-7 Non Turbo 1983-1992
$132.17
|
